Services
BWTS - Ballast Water Treatment Systems
Commissioning and maintenance/repair of following BWTS / BWMS Systems are carried out by our qualified service engineers. We support also for main spare parts such as UV Lamp, quartz tubes, UV driver, filter element, pressure and temperature transmitters. For more detailed information, you can write to us from the contact page or call us from the phone number.
- PACT MARINE - PACT Environmental Technology Co., Ltd.
- Cyeco - Shanghai Electric Cyeco Environmental Technology Co., Ltd.
- Seascape - Elite Marine
- GloEn Patrol - Panasia
- Blue Ocean Shield - Cosco Shipping (Cosco BOS)
- Ocean Guard - DESMI
- LeesGreen BWMS - Lees Green
- BIO-SEA - BIO-UV
- Alfa Laval - Pure Ballast
Nitrogen Generator Systems (Membrane & Psa)
Annual maintenance, calibration and health check of the membranes of both Membrane and PSA (Pressure Swing Adsorption) type Nitrogen Generator systems are carried out by our experienced team. For more detailed information, please feel free to contact us from the contact page.
- Membrane N2 Generators - GENERON
- PSA N2 Generations - SMC Asia Gas Systems Co., Ltd
Level Measuring And Monitoring Systems
Commissioning, yearly maintenance and calibration of tank liquid, pressure and gas level measurement systems of Auxitrol, Enraf, Honeywell and Panasia are performed by our qualified service engineers using special calibration equipments. For more detailed information, you can write to us from the contact page.
- Tank Radar Systems (FMR240, FMP240, EM940, EM540)
- PL3700 Tank Level/Pressure Monitoring Systems
- LIDEC – WIDS - HighLevel/HighHighLevel Systems
- GASBAL - Gas Monitoring System
Electropneumatic Level Measuring Systems
Yearly maintenance and calibration of electropneumatic level measurement systems are carried out, measurement accuracy is tested using special test equipment.
If you face any problems about your system, please do not hesitate to contact us.
- Bubbling system TN3801 - Honeywell , Enraf, Auxitroll
- Air Purge System P940 - Panasia
ODME - Oil Discharge and Monitoring Systems
Oil Discharge and Monitoring Equipment (ODME) is a requirement for all ships carrying cargo within the frame of MARPOL’s MEPC rules. In cases where it is determined that the system is not working, can cause arresting of the ship, heavy fines and delays.
To avoid unexpected risks and costs, you can contact us for inspection of all components and calibration of your VAF Instruments Oilcon Mark 6M ODME system by our experienced service engineers.
- Main spare Parts are as follows
- Assy flow switch - Skid Flowmeter (including cable, Spare part no: 0379-0125)
- Electro Pneumatic Unit EPU (Spare part no: 0390-1211)
- Main Control Unit MCU (Spare part no: 0206-0088)
- Pressure switch for EPU (Spare part no: 0675-0350)
- Window wash pump (Spare part no: 0671-0026)
- Air supply regulator (Coupling 6mm) (Spare part no: 0399-0370)
- Air supply regulator for Window wash pump (Coupling 8mm) (Spare part no: 0399-0368)
- 2/2 Solenoid valve 3/8 MK6 (window wash, including coupling) (Spare part no: 0675-0349)
- Pressure reducing valve fresh water conn. ½ BSPT (Spare part no: 0399-0362)
- New Detector cell including cable (Spare part no: 0390-1233)
- 2 x O-rings for measuring cell ID 53. 70 x Ø 1.78 mm (Spare part no: 0630-3034)
- Oil Reservoir (Spare part no: 0609 - 0257)
- DP/I transmitter Standard, measure span 13 to 130 kPa (Spare part no: 0399-0318)
Propulsion Performance Management Systems
Commissioning, maintenance and repair of Flowmeter, Viscosimeter, T-Sense, TT-Sense systems are carried out by our trained and experienced team. For more detailed information, you can write or call us from the contact page.
- VAF T-Sense® Optical Torque and Thrust Meter, Shaft Power Meter
- VAF Flowmeters (MidFlow type PT2 preferably)
- VAF ViscoSense®3D, Viscosity & Density Control Systems
Impressed Current Antifouling (ICAF) and Cathodic (ICCP) Protection Systems
Even it seems like a simple system, Antifouling (ICAF) and Cathodic (ICCP) protection systems are of great importance for vessels. How efficiently the system works is related to how much the system is installed in accordance with the manufacturer’s recommendations. In cases when the system does not work properly and efficiently, it causes clogging of the inlet pipes and unexpected critical problems.
You can write or call to us from the contact page to get the support of our qualified service engineers during the anode renewal processes, both on new construction ships and on retrofit ships arriving for repair.
UTI (Trimode Portable Gauging)
Yearly maintenance, repair and calibration of MMC UTI – Portable Oil-Water Interface and Temperature measurement equipment are performed by our Engineer using special test equipment. Please feel free to contact us about spares and calibration of UTI equipments.
INCINERATOR – OWS - STP
Maintenance and repairing of DETEGASA Incinerator, OWS (Oil Water Separator) and STP (Sewage Treatment Plant) systems are carried out by our trained service engineers. For more detailed information, you can write or call to us from the contact page.
- Incinerator, Compactor
- OWS - Oily Water Seperator
- STP - Sewage Treatment Plant
Window Wipers (Scanwipers)
Commissioning, maintenance and repairing of bridge window wiper systems are carried out by our experienced service engineers. If you encounter any problems about your Window Wiper system, please do not hesitate to contact us.
- Wipers (Pantograph and Straightlines) - SCANWIPERS
- Sunscreen - SCANWIPERS
